The Edmar Abrasive Company

Untitled Document
Diamond Core Bits



Dry Cutting


KK-DRY
Click for larger image

Premium
KK-DRY core bits are slotted for dry cutting brick, block and cured concrete on grinders or hammer drills without percussion. The segments have alternating slanted tips that allow the operator to start drilling without a pilot hole. Drilling depth is 9 in.

Size
(Dia. x Thickness x Arbor)
Segment
Hgt.
Rim Hgt. Landings Spec Part # Quantity
Requested
Add to Order*
1 x 9 inches x 5/8-11 thread 0.300 -- -- KK-DRY 11400
1 1/2 x 9 inches x 5/8-11 thread 0.300 -- -- KK-DRY 11404
1 1/4 x 9 inches x 5/8-11 thread 0.300 -- -- KK-DRY 11402
1 3/4 x 9 inches x 5/8-11 thread 0.300 -- -- KK-DRY 11406
2 x 9 inches x 5/8-11 thread 0.300 -- -- KK-DRY 11408
2 1/2 x 9 inches x 5/8-11 thread 0.300 -- -- KK-DRY 11412
2 1/4 x 9 inches x 5/8-11 thread 0.300 -- -- KK-DRY 11410
3 x 9 inches x 5/8-11 thread 0.300 -- -- KK-DRY 11414
3 1/2 x 9 inches x 5/8-11 thread 0.300 -- -- KK-DRY 11416
4 x 9 inches x 5/8-11 thread 0.300 -- -- KK-DRY 11418
4 1/2 x 9 inches x 5/8-11 thread 0.300 -- -- KK-DRY 11420
5 x 9 inches x 5/8-11 thread 0.300 -- -- KK-DRY 11422
6 x 9 inches x 5/8-11 thread 0.300 -- -- KK-DRY 11424
 
 
*Fill the quantity desired for a part and click the ADD button directly to the right of that part.  Ordering requires registering.

THE EDMAR ABRASIVE COMPANY • P.O.Box 217 • 1107 Sussex Blvd. • Broomall, PA 19008 • (610) 544-4900 • (800) 550-8800